use the targetDirectory based on repo root

dist/azure/gitreleasemanager/close/lib.json

@@ -0,0 +1,46 @@
+{
+    "messages": {
+        "LIB_UnhandledEx": "Unhandled: %s",
+        "LIB_FailOnCode": "Failure return code: %d",
+        "LIB_MkdirFailed": "Unable to create directory '%s'. %s",
+        "LIB_MkdirFailedFileExists": "Unable to create directory '%s'. Conflicting file exists: '%s'",
+        "LIB_MkdirFailedInvalidDriveRoot": "Unable to create directory '%s'. Root directory does not exist: '%s'",
+        "LIB_MkdirFailedInvalidShare": "Unable to create directory '%s'. Unable to verify the directory exists: '%s'. If directory is a file share, please verify the share name is correct, the share is online, and the current process has permission to access the share.",
+        "LIB_MultilineSecret": "Secrets cannot contain multiple lines",
+        "LIB_ProcessError": "There was an error when attempting to execute the process '%s'. This may indicate the process failed to start. Error: %s",
+        "LIB_ProcessExitCode": "The process '%s' failed with exit code %s",
+        "LIB_ProcessStderr": "The process '%s' failed because one or more lines were written to the STDERR stream",
+        "LIB_ReturnCode": "Return code: %d",
+        "LIB_ResourceFileNotExist": "Resource file doesn\\'t exist: %s",
+        "LIB_ResourceFileAlreadySet": "Resource file has already set to: %s",
+        "LIB_ResourceFileNotSet": "Resource file haven\\'t set, can\\'t find loc string for key: %s",
+        "LIB_StdioNotClosed": "The STDIO streams did not close within %s seconds of the exit event from process '%s'. This may indicate a child process inherited the STDIO streams and has not yet exited.",
+        "LIB_WhichNotFound_Linux": "Unable to locate executable file: '%s'. Please verify either the file path exists or the file can be found within a directory specified by the PATH environment variable. Also check the file mode to verify the file is executable.",
+        "LIB_WhichNotFound_Win": "Unable to locate executable file: '%s'. Please verify either the file path exists or the file can be found within a directory specified by the PATH environment variable. Also verify the file has a valid extension for an executable file.",
+        "LIB_LocStringNotFound": "Can\\'t find loc string for key: %s",
+        "LIB_ParameterIsRequired": "%s not supplied",
+        "LIB_InputRequired": "Input required: %s",
+        "LIB_InvalidPattern": "Invalid pattern: '%s'",
+        "LIB_EndpointNotExist": "Endpoint not present: %s",
+        "LIB_EndpointDataNotExist": "Endpoint data parameter %s not present: %s",
+        "LIB_EndpointAuthNotExist": "Endpoint auth data not present: %s",
+        "LIB_InvalidEndpointAuth": "Invalid endpoint auth: %s",
+        "LIB_InvalidSecureFilesInput": "Invalid secure file input: %s",
+        "LIB_PathNotFound": "Not found %s: %s",
+        "LIB_PathHasNullByte": "Path cannot contain null bytes",
+        "LIB_OperationFailed": "Failed %s: %s",
+        "LIB_UseFirstGlobMatch": "Multiple workspace matches. using first.",
+        "LIB_MergeTestResultNotSupported": "Merging test results from multiple files to one test run is not supported on this version of build agent for OSX/Linux, each test result file will be published as a separate test run in VSO/TFS.",
+        "LIB_PlatformNotSupported": "Platform not supported: %s",
+        "TOOL_LIB_CachingTool": "Caching tool: %s %s %s",
+        "_TOOL_LIB_CachingTool.comment": "This informational log message indicates that a tool, that was just downloaded, is being copied into the cache directory. %s %s %s represent the tool name, version information, and processor architecture.",
+        "TOOL_LIB_Downloading": "Downloading: %s",
+        "_TOOL_LIB_Downloading.comment": "This information log message indicates that a file is being downloaded. %s represents the URL being downloaded.",
+        "TOOL_LIB_ExtractingArchive": "Extracting archive",
+        "_TOOL_LIB_ExtractingArchive.comment": "This informational log message indicates that an archive file is being extracted. For example, a .zip file, .7z file, or .tar.gz file.",
+        "TOOL_LIB_FoundInCache": "Found tool in cache: %s %s %s",
+        "_TOOL_LIB_FoundInCache.comment": "This informational log message indicates that the request tool is already cached, and does not need to be downloaded again. %s %s %s represent the tool name, version information, and processor architecture.",
+        "TOOL_LIB_PrependPath": "Prepending PATH environment variable with directory: %s",
+        "_TOOL_LIB_PrependPath.comment": "This informational log message indicates that a directory is being prepended to the front of the PATH environment variable. The directories specified by the PATH environment variable are used to resolve the location of command line tools."
+    }
+}

dist/azure/gitreleasemanager/close/task.json

@@ -0,0 +1,60 @@
+{
+    "id": "f5304356-f6e3-48e9-9b65-a9efa41ce7a2",
+    "name": "gitreleasemanager/close",
+    "friendlyName": "Close GitReleaseManager Task",
+    "description": "Tool for creating and exporting releases for software applications hosted on GitHub",
+    "author": "GitTools Contributors",
+    "helpMarkDown": "See the [documentation](https://gittools.github.io/GitReleaseManager/docs/) for help",
+    "category": "Build",
+    "demands": [],
+    "version": {
+        "Major": "1",
+        "Minor": "0",
+        "Patch": "0"
+    },
+    "minimumAgentVersion": "2.115.0",
+    "execution": {
+        "Node": {
+            "target": "bundle.js",
+            "argumentFormat": "",
+            "workingDirectory": "."
+        }
+    },
+    "instanceNameFormat": "gitreleasemanager/close",
+    "inputs": [{
+        "name": "owner",
+        "type": "string",
+        "label": "The owner of the repository",
+        "defaultValue": "",
+        "required": true,
+        "helpMarkDown": "The owner of the repository"
+    }, {
+        "name": "repository",
+        "type": "string",
+        "label": "The name of the repository",
+        "defaultValue": "",
+        "required": true,
+        "helpMarkDown": "The name of the repository"
+    }, {
+        "name": "token",
+        "type": "string",
+        "label": "The access token to access GitHub with",
+        "defaultValue": "",
+        "required": true,
+        "helpMarkDown": "The access token to access GitHub with"
+    }, {
+        "name": "milestone",
+        "type": "string",
+        "label": "The milestone to use",
+        "defaultValue": "",
+        "required": true,
+        "helpMarkDown": "The milestone to use"
+    }, {
+        "name": "targetDirectory",
+        "type": "string",
+        "label": "The directory on which GitReleaseManager should be executed. Defaults to current directory",
+        "defaultValue": "",
+        "required": false,
+        "helpMarkDown": "The directory on which GitReleaseManager should be executed. Defaults to current directory"
+    }]
+}

dist/azure/gitreleasemanager/open/lib.json

@@ -0,0 +1,46 @@
+{
+    "messages": {
+        "LIB_UnhandledEx": "Unhandled: %s",
+        "LIB_FailOnCode": "Failure return code: %d",
+        "LIB_MkdirFailed": "Unable to create directory '%s'. %s",
+        "LIB_MkdirFailedFileExists": "Unable to create directory '%s'. Conflicting file exists: '%s'",
+        "LIB_MkdirFailedInvalidDriveRoot": "Unable to create directory '%s'. Root directory does not exist: '%s'",
+        "LIB_MkdirFailedInvalidShare": "Unable to create directory '%s'. Unable to verify the directory exists: '%s'. If directory is a file share, please verify the share name is correct, the share is online, and the current process has permission to access the share.",
+        "LIB_MultilineSecret": "Secrets cannot contain multiple lines",
+        "LIB_ProcessError": "There was an error when attempting to execute the process '%s'. This may indicate the process failed to start. Error: %s",
+        "LIB_ProcessExitCode": "The process '%s' failed with exit code %s",
+        "LIB_ProcessStderr": "The process '%s' failed because one or more lines were written to the STDERR stream",
+        "LIB_ReturnCode": "Return code: %d",
+        "LIB_ResourceFileNotExist": "Resource file doesn\\'t exist: %s",
+        "LIB_ResourceFileAlreadySet": "Resource file has already set to: %s",
+        "LIB_ResourceFileNotSet": "Resource file haven\\'t set, can\\'t find loc string for key: %s",
+        "LIB_StdioNotClosed": "The STDIO streams did not close within %s seconds of the exit event from process '%s'. This may indicate a child process inherited the STDIO streams and has not yet exited.",
+        "LIB_WhichNotFound_Linux": "Unable to locate executable file: '%s'. Please verify either the file path exists or the file can be found within a directory specified by the PATH environment variable. Also check the file mode to verify the file is executable.",
+        "LIB_WhichNotFound_Win": "Unable to locate executable file: '%s'. Please verify either the file path exists or the file can be found within a directory specified by the PATH environment variable. Also verify the file has a valid extension for an executable file.",
+        "LIB_LocStringNotFound": "Can\\'t find loc string for key: %s",
+        "LIB_ParameterIsRequired": "%s not supplied",
+        "LIB_InputRequired": "Input required: %s",
+        "LIB_InvalidPattern": "Invalid pattern: '%s'",
+        "LIB_EndpointNotExist": "Endpoint not present: %s",
+        "LIB_EndpointDataNotExist": "Endpoint data parameter %s not present: %s",
+        "LIB_EndpointAuthNotExist": "Endpoint auth data not present: %s",
+        "LIB_InvalidEndpointAuth": "Invalid endpoint auth: %s",
+        "LIB_InvalidSecureFilesInput": "Invalid secure file input: %s",
+        "LIB_PathNotFound": "Not found %s: %s",
+        "LIB_PathHasNullByte": "Path cannot contain null bytes",
+        "LIB_OperationFailed": "Failed %s: %s",
+        "LIB_UseFirstGlobMatch": "Multiple workspace matches. using first.",
+        "LIB_MergeTestResultNotSupported": "Merging test results from multiple files to one test run is not supported on this version of build agent for OSX/Linux, each test result file will be published as a separate test run in VSO/TFS.",
+        "LIB_PlatformNotSupported": "Platform not supported: %s",
+        "TOOL_LIB_CachingTool": "Caching tool: %s %s %s",
+        "_TOOL_LIB_CachingTool.comment": "This informational log message indicates that a tool, that was just downloaded, is being copied into the cache directory. %s %s %s represent the tool name, version information, and processor architecture.",
+        "TOOL_LIB_Downloading": "Downloading: %s",
+        "_TOOL_LIB_Downloading.comment": "This information log message indicates that a file is being downloaded. %s represents the URL being downloaded.",
+        "TOOL_LIB_ExtractingArchive": "Extracting archive",
+        "_TOOL_LIB_ExtractingArchive.comment": "This informational log message indicates that an archive file is being extracted. For example, a .zip file, .7z file, or .tar.gz file.",
+        "TOOL_LIB_FoundInCache": "Found tool in cache: %s %s %s",
+        "_TOOL_LIB_FoundInCache.comment": "This informational log message indicates that the request tool is already cached, and does not need to be downloaded again. %s %s %s represent the tool name, version information, and processor architecture.",
+        "TOOL_LIB_PrependPath": "Prepending PATH environment variable with directory: %s",
+        "_TOOL_LIB_PrependPath.comment": "This informational log message indicates that a directory is being prepended to the front of the PATH environment variable. The directories specified by the PATH environment variable are used to resolve the location of command line tools."
+    }
+}

dist/azure/gitreleasemanager/open/task.json

@@ -0,0 +1,60 @@
+{
+    "id": "5d437bf5-f193-4449-b531-c4c69eebaa48",
+    "name": "gitreleasemanager/open",
+    "friendlyName": "Discard GitReleaseManager Task",
+    "description": "Tool for creating and exporting releases for software applications hosted on GitHub",
+    "author": "GitTools Contributors",
+    "helpMarkDown": "See the [documentation](https://gittools.github.io/GitReleaseManager/docs/) for help",
+    "category": "Build",
+    "demands": [],
+    "version": {
+        "Major": "1",
+        "Minor": "0",
+        "Patch": "0"
+    },
+    "minimumAgentVersion": "2.115.0",
+    "execution": {
+        "Node": {
+            "target": "bundle.js",
+            "argumentFormat": "",
+            "workingDirectory": "."
+        }
+    },
+    "instanceNameFormat": "gitreleasemanager/open",
+    "inputs": [{
+        "name": "owner",
+        "type": "string",
+        "label": "The owner of the repository",
+        "defaultValue": "",
+        "required": true,
+        "helpMarkDown": "The owner of the repository"
+    }, {
+        "name": "repository",
+        "type": "string",
+        "label": "The name of the repository",
+        "defaultValue": "",
+        "required": true,
+        "helpMarkDown": "The name of the repository"
+    }, {
+        "name": "token",
+        "type": "string",
+        "label": "The access token to access GitHub with",
+        "defaultValue": "",
+        "required": true,
+        "helpMarkDown": "The access token to access GitHub with"
+    }, {
+        "name": "milestone",
+        "type": "string",
+        "label": "The milestone to use",
+        "defaultValue": "",
+        "required": true,
+        "helpMarkDown": "The milestone to use"
+    }, {
+        "name": "targetDirectory",
+        "type": "string",
+        "label": "The directory on which GitReleaseManager should be executed. Defaults to current directory",
+        "defaultValue": "",
+        "required": false,
+        "helpMarkDown": "The directory on which GitReleaseManager should be executed. Defaults to current directory"
+    }]
+}

dist/azure/vss-extension.json

@@ -15,7 +15,9 @@
         { "path": "gitversion/execute" },
         { "path": "gitreleasemanager/setup" },
         { "path": "gitreleasemanager/create" },
-        { "path": "gitreleasemanager/discard" }
+        { "path": "gitreleasemanager/discard" },
+        { "path": "gitreleasemanager/close" },
+        { "path": "gitreleasemanager/open" }
     ],
     "categories": [
         "Azure Pipelines"
@@ -107,5 +109,23 @@
         "properties": {
             "name": "gitreleasemanager/discard"
         }
+    }, {
+        "id": "close-gitreleasemanager-task",
+        "type": "ms.vss-distributed-task.task",
+        "targets": [
+            "ms.vss-distributed-task.tasks"
+        ],
+        "properties": {
+            "name": "gitreleasemanager/close"
+        }
+    }, {
+        "id": "open-gitreleasemanager-task",
+        "type": "ms.vss-distributed-task.task",
+        "targets": [
+            "ms.vss-distributed-task.tasks"
+        ],
+        "properties": {
+            "name": "gitreleasemanager/open"
+        }
     }]
 }

gitreleasemanager/close/action.yml

@@ -0,0 +1,30 @@
+name: gitreleasemanager-close
+description: GitHub Action for creating and exporting releases for software applications hosted on GitHub. Closes a release
+author: GitTools
+branding:
+  color: gray-dark
+  icon: git-pull-request
+runs:
+  using: node12
+  main: ../../dist/github/gitreleasemanager/close/bundle.js
+inputs:
+  owner:
+    description: The owner of the repository
+    required: true
+    default: ''
+  repository:
+    description: The name of the repository
+    required: true
+    default: ''
+  token:
+    description: The access token to access GitHub with
+    required: true
+    default: ''
+  milestone:
+    description: The milestone to use
+    required: true
+    default: ''  
+  targetDirectory:
+    description: The directory on which GitReleaseManager should be executed. Defaults to current directory
+    required: false
+    default: ''

gitreleasemanager/open/action.yml

@@ -0,0 +1,30 @@
+name: gitreleasemanager-open
+description: GitHub Action for creating and exporting releases for software applications hosted on GitHub. Opens a release
+author: GitTools
+branding:
+  color: gray-dark
+  icon: git-pull-request
+runs:
+  using: node12
+  main: ../../dist/github/gitreleasemanager/open/bundle.js
+inputs:
+  owner:
+    description: The owner of the repository
+    required: true
+    default: ''
+  repository:
+    description: The name of the repository
+    required: true
+    default: ''
+  token:
+    description: The access token to access GitHub with
+    required: true
+    default: ''
+  milestone:
+    description: The milestone to use
+    required: true
+    default: ''  
+  targetDirectory:
+    description: The directory on which GitReleaseManager should be executed. Defaults to current directory
+    required: false
+    default: ''

src/tasks/gitreleasemanager/close.ts

@@ -0,0 +1,4 @@
+import "reflect-metadata";
+import { close } from "./main";
+
+close();

src/tasks/gitreleasemanager/main.ts

@@ -53,4 +53,34 @@ export async function discard() {
     } catch (error) {
         buildAgent.setFailed(error.message, true);
     }
+}
+
+export async function close() {
+    try {
+
+        gitReleaseManagerTool.disableTelemetry();
+
+        const settings = Settings.getCloseSettings(buildAgent);
+
+        await gitReleaseManagerTool.close(settings);
+
+        buildAgent.setSucceeded("GitVersionManager closed release successfully", true);
+    } catch (error) {
+        buildAgent.setFailed(error.message, true);
+    }
+}
+
+export async function open() {
+    try {
+
+        gitReleaseManagerTool.disableTelemetry();
+
+        const settings = Settings.getOpenSettings(buildAgent);
+
+        await gitReleaseManagerTool.close(settings);
+
+        buildAgent.setSucceeded("GitVersionManager opened release successfully", true);
+    } catch (error) {
+        buildAgent.setFailed(error.message, true);
+    }
 }

src/tasks/gitreleasemanager/open.ts

@@ -0,0 +1,4 @@
+import "reflect-metadata";
+import { open } from "./main";
+
+open();

src/tools/gitreleasemanager/models.ts

@@ -2,6 +2,7 @@ export enum CommonFields {
     repository = "repository",
     owner = "owner",
     token = "token",
+    targetDirectory = "targetDirectory",
 }
 
 export enum CreateFields {
@@ -10,19 +11,26 @@ export enum CreateFields {
     inputFileName = "inputFileName",
     isPreRelease = "isPreRelease",
     commit = "commit",
-    targetDirectory = "targetDirectory",
     assets = "assets",
 }
 
 export enum DiscardFields {
     milestone = "milestone",
-    targetDirectory = "targetDirectory",
+}
+
+export enum CloseFields {
+    milestone = "milestone",
+}
+
+export enum OpenFields {
+    milestone = "milestone",
 }
 
 export interface GitReleaseManagerSettings {
     [CommonFields.repository]: string;
     [CommonFields.owner]: string;
     [CommonFields.token]: string;
+    [CommonFields.targetDirectory]: string;
 }
 
 export interface GitReleaseManagerCreateSettings extends GitReleaseManagerSettings {
@@ -31,11 +39,17 @@ export interface GitReleaseManagerCreateSettings extends GitReleaseManagerSettin
     [CreateFields.inputFileName]: string;
     [CreateFields.isPreRelease]: boolean;
     [CreateFields.commit]: string;
-    [CreateFields.targetDirectory]: string;
     [CreateFields.assets]?: string[];
 }
 
 export interface GitReleaseManagerDiscardSettings extends GitReleaseManagerSettings {
     [DiscardFields.milestone]: string;
-    [DiscardFields.targetDirectory]: string;
+}
+
+export interface GitReleaseManagerCloseSettings extends GitReleaseManagerSettings {
+    [CloseFields.milestone]: string;
+}
+
+export interface GitReleaseManagerOpenSettings extends GitReleaseManagerSettings {
+    [OpenFields.milestone]: string;
 }

src/tools/gitreleasemanager/settings.ts

@@ -1,15 +1,23 @@
 import { IBuildAgent } from "../../core/models";
-import { GitReleaseManagerSettings, CommonFields, CreateFields, GitReleaseManagerCreateSettings, DiscardFields, GitReleaseManagerDiscardSettings } from "./models";
+import {
+    GitReleaseManagerSettings,
+    CommonFields, CreateFields, DiscardFields,
+    CloseFields, OpenFields,
+
+    GitReleaseManagerCreateSettings,
+    GitReleaseManagerDiscardSettings,
+    GitReleaseManagerCloseSettings,
+    GitReleaseManagerOpenSettings,
+} from "./models";
 
 export class Settings {
 
-    public static getCreateSettings(buildAgent: IBuildAgent) : GitReleaseManagerCreateSettings {
+    public static getCreateSettings(buildAgent: IBuildAgent): GitReleaseManagerCreateSettings {
         const milestone = buildAgent.getInput(CreateFields.milestone);
         const releaseName = buildAgent.getInput(CreateFields.releaseName);
         const inputFileName = buildAgent.getInput(CreateFields.inputFileName);
         const isPreRelease = buildAgent.getBooleanInput(CreateFields.isPreRelease);
         const commit = buildAgent.getInput(CreateFields.commit);
-        const targetDirectory = buildAgent.getInput(CreateFields.targetDirectory);
         const assets = buildAgent.getListInput(CreateFields.assets);
 
         const commonSettings = Settings.getCommonSettings(buildAgent);
@@ -20,20 +28,37 @@ export class Settings {
             inputFileName,
             isPreRelease,
             commit,
-            targetDirectory,
             assets
         }
     }
 
-    public static getDiscardSettings(buildAgent: IBuildAgent) : GitReleaseManagerDiscardSettings {
+    public static getDiscardSettings(buildAgent: IBuildAgent): GitReleaseManagerDiscardSettings {
         const milestone = buildAgent.getInput(DiscardFields.milestone);
-        const targetDirectory = buildAgent.getInput(CreateFields.targetDirectory);
 
         const commonSettings = Settings.getCommonSettings(buildAgent);
         return {
             ...commonSettings,
             milestone,
-            targetDirectory,
+        }
+    }
+
+    public static getCloseSettings(buildAgent: IBuildAgent): GitReleaseManagerCloseSettings {
+        const milestone = buildAgent.getInput(CloseFields.milestone);
+
+        const commonSettings = Settings.getCommonSettings(buildAgent);
+        return {
+            ...commonSettings,
+            milestone,
+        }
+    }
+
+    public static getOpenSettings(buildAgent: IBuildAgent): GitReleaseManagerOpenSettings {
+        const milestone = buildAgent.getInput(OpenFields.milestone);
+
+        const commonSettings = Settings.getCommonSettings(buildAgent);
+        return {
+            ...commonSettings,
+            milestone,
         }
     }
 
@@ -41,11 +66,13 @@ export class Settings {
         const owner = buildAgent.getInput(CommonFields.owner, true);
         const repository = buildAgent.getInput(CommonFields.repository, true);
         const token = buildAgent.getInput(CommonFields.token, true);
+        const targetDirectory = buildAgent.getInput(CommonFields.targetDirectory);
 
         return {
             owner,
             repository,
-            token
+            token,
+            targetDirectory,
         };
     }
 }

src/tools/gitreleasemanager/tool.ts

@@ -8,13 +8,17 @@ import { IVersionManager } from "../../core/versionManager";
 import {
     GitReleaseManagerSettings,
     GitReleaseManagerCreateSettings,
-    GitReleaseManagerDiscardSettings
+    GitReleaseManagerDiscardSettings,
+    GitReleaseManagerCloseSettings,
+    GitReleaseManagerOpenSettings,
 } from "./models";
 
 export interface IGitReleaseManagerTool extends IDotnetTool {
     install(versionSpec: string, includePrerelease: boolean): Promise<void>;
     create(settings: GitReleaseManagerCreateSettings): Promise<IExecResult>;
     discard(settings: GitReleaseManagerDiscardSettings): Promise<IExecResult>;
+    close(settings: GitReleaseManagerCloseSettings): Promise<IExecResult>;
+    open(settings: GitReleaseManagerOpenSettings): Promise<IExecResult>;
 }
 
 @injectable()
@@ -43,6 +47,18 @@ export class GitReleaseManagerTool extends DotnetTool implements IGitReleaseMana
         return this.execute("dotnet-gitreleasemanager", args);
     }
 
+    public close(settings: GitReleaseManagerCloseSettings): Promise<IExecResult> {
+        const args = this.getCloseArguments(settings);
+
+        return this.execute("dotnet-gitreleasemanager", args);
+    }
+
+    public open(settings: GitReleaseManagerOpenSettings): Promise<IExecResult> {
+        const args = this.getCloseArguments(settings);
+
+        return this.execute("dotnet-gitreleasemanager", args);
+    }
+
     getCommonArguments(settings: GitReleaseManagerSettings): string[] {
         const args: string[] = [];
 
@@ -50,6 +66,10 @@ export class GitReleaseManagerTool extends DotnetTool implements IGitReleaseMana
         args.push("--repository", settings.repository);
         args.push("--token", settings.token);
 
+        settings.targetDirectory = this.getRepoDir(settings.targetDirectory);
+
+        args.push("--targetDirectory", settings.targetDirectory);
+
         return args;
     }
 
@@ -59,9 +79,26 @@ export class GitReleaseManagerTool extends DotnetTool implements IGitReleaseMana
         if (settings.milestone) {
             args.push("--milestone", settings.milestone);
         }
-        settings.targetDirectory = this.getRepoDir(settings.targetDirectory);
 
-        args.push("--targetDirectory", settings.targetDirectory);
+        return args;
+    }
+
+    getCloseArguments(settings: GitReleaseManagerCloseSettings): string[] {
+        const args: string[] = ['close', ...this.getCommonArguments(settings)];
+
+        if (settings.milestone) {
+            args.push("--milestone", settings.milestone);
+        }
+
+        return args;
+    }
+
+    getOpenArguments(settings: GitReleaseManagerOpenSettings): string[] {
+        const args: string[] = ['open', ...this.getCommonArguments(settings)];
+
+        if (settings.milestone) {
+            args.push("--milestone", settings.milestone);
+        }
 
         return args;
     }
@@ -79,10 +116,6 @@ export class GitReleaseManagerTool extends DotnetTool implements IGitReleaseMana
             args.push("--targetcommitish", settings.commit);
         }
 
-        settings.targetDirectory = this.getRepoDir(settings.targetDirectory);
-
-        args.push("--targetDirectory", settings.targetDirectory);
-
         if (settings.inputFileName) {
             if (this.buildAgent.fileExists(settings.inputFileName)) {
                 args.push("--inputFilePath", settings.inputFileName);

webpack.config.js

@@ -13,6 +13,8 @@ module.exports = (env) => {
             'gitreleasemanager/setup': path.resolve(__dirname, 'src/tasks/gitreleasemanager/setup.ts'),
             'gitreleasemanager/create': path.resolve(__dirname, 'src/tasks/gitreleasemanager/create.ts'),
             'gitreleasemanager/discard': path.resolve(__dirname, 'src/tasks/gitreleasemanager/discard.ts'),
+            'gitreleasemanager/close': path.resolve(__dirname, 'src/tasks/gitreleasemanager/close.ts'),
+            'gitreleasemanager/open': path.resolve(__dirname, 'src/tasks/gitreleasemanager/open.ts'),
         },
         target: 'node',
         mode: mode,